• 100% solids product based on one-component epoxy.
• Seals the vertical surface, increasing the performance of the product applied later.
• Good adhesion to concrete even on vertical surfaces.
• Facilitates adhesion and extension on any type of surface where it is applied, even vertically.
• Improves thixotropy in epoxy product applications.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars. It is necessary to start from a porous concrete support, without grout and free of curing liquids. Minimum compressive strength of concrete: 15 N/mm2. Minimum tensile strength of concrete: 1 N/mm2. If in doubt, carry out a test before application. The recommended product addition ranges from 10 to 30% depending on the inclination. Mix the product with the help of a low speed agitator to avoid including air. It is applied in 1 or 2 layers maximum to correct the inclination of the surface where it is applied. Once the container is opened, the rest of the unconsumed product can be stored in a clean container with a lid.

Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC. To clean materials and utensils, use FUTURSOLVENT 01 before the product hardens. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, masonry in general, community maintenance, waterproofing, etc.
• Improves adhesion on difficult, vertical substrates or with different drops of epoxy coatings, providing thixotropy.