• Single component, easy to apply and quick drying.
• Great elasticity.
• Low viscosity.
• Very good adhesion even on non-porous supports.
• Excellent adhesion on almost all types of surfaces.
• Solution as impregnant and sealing of concrete.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars.
Adheres perfectly to wet surfaces. Puddles or stagnant water should be eliminated.
Apply with a brush or roller.
Consumption: Apply 100-200g/m² per layer depending on the porosity of the support. On very porous supports, 2 coats are recommended. By applying in 3 layers you can reach 500 g/m². Once cured, apply waterproofing membrane within 24 hours.

Touch dry 1-2 hours on dry concrete: 1 hour on wet concrete
Membrane application: 24 hours

Maintenance and cleaning: To maintain the appearance of the floor after application, all spills must be removed immediately after they have occurred. The floor must be cleaned regularly using rotating brushes, high-pressure cleaners, vacuum cleaners, using neutral detergents and appropriate waxes.
Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC.
Application in closed areas must be carried out ensuring proper ventilation during application and 24 hours after.
Do not exceed the maximum consumption because it may affect its adhesion and durability.
Avoid the formation of puddles of the product.
In applications exposed to U.V. rays. Yellowing may occur without affecting membrane performance.
Incorrect treatment of cracks and singular points can lead to a reduction in the useful life of the pavement.
To clean materials and utensils, use FUTUR-SOLVENT PU 01 before the product hardens. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, repair and restoration of buildings, industrial flooring, etc.
Application as:
• Primer for polyurethane systems (waterproofing and flooring) on ​​wet, dry, porous or non-porous supports.
• Dry, wet or wet concrete supports.

Supported media:
• Porous or non-porous supports
• Dry or wet, porous or non-porous concrete supports, even green concrete.