• Quick and easy application.
• Water based, without odors or flammable solvents.
• Good adhesion to concrete with high mechanical resistance, resistance to abrasion and chemical agents.
• Good covering power.
• Excellent resistance to aging. Very good resistance to friction and abrasion.
• Resistant to humidity and rainwater.
• Great durability. Elastic coating that allows you to correct defects in the support, avoiding cracks and fissures.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars.
Apply at room temperature between +5 ºC and 40 ºC. The temperature of the support must be between +5 ºC and 40 ºC. The support must be dry and with relative humidity < 80% (Maximum residual humidity of the support < 4%).
Stir before use with an electric stirrer (300-400 rpm) for a minimum of 1 minute until a homogeneous product is achieved.
It is applied with a brush, roller or airless spray. In the first layer, dilute the product 5-10% with water as a primer. The rest of the layers apply the product without diluting.

Performance: 4-6 m2/Kg
Drying time: 30-45 minutes
Repainting: 1 Hour
Total drying: 24 hours

Do not apply when there is a risk of rain or relative humidity greater than 80%.
Store in its original container away from frost, direct sun and extreme temperatures.
Apply in places with good air renewal. In case of insufficient ventilation, use an appropriate protective mask.
To clean utensils, use water before the product dries. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, repair and restoration of sports courts, recreational centers, sports centers, etc.
Application as:
• Coating painting and marking of sports court lines.