• Reduce la absorción de agua en la superficie donde se aplica en un 90%.
• Evita la aparición de eflorescencias.
• Completamente transpirable.
• Protección de las superficies tratadas contra la acción de la humedad y agentes climáticos.
• Aumenta el aislamiento térmico.
• Protege las superficies tratadas del ensuciamiento.
• Facilita la autolimpieza en superficies verticales.
• Aumenta la resistencia de las pinturas de terminación.
• Larga durabilidad, de aproximadamente 5 años dependiendo de la climatología de la zona.

Before applying, shake the product well and check that the support is clean, dry, without residual moisture and as solid as possible. In case of loose material or in poor condition, use appropriate mortars for repair. If the support has some residual moisture, whitish stains may appear or the waterproofing layer may loosen.
The penetration of the product will depend on the absorption power of the surface. Sufficient impregnation of the material is essential to guarantee perfect waterproofing of extraordinary duration, therefore, in some cases it will be necessary to clean the support to be treated using a jet of water or sand under pressure, in order to eliminate impurities as much as possible and increase the absorption power
Apply with a brush, roller, airless spray in thin layers. It is recommended to apply the product with low pressure sprayers.

Yield between 150-250 g/m2 depending on the porosity of the support. Touch dry: 30-40 minutes. Total curing: 1 day. Repainting: 24 hours.
To clean utensils, use water once the application work is finished.
Store in its original container away from frost, direct sun and extreme temperatures. Do not apply at ambient temperatures below 5 ºC or above 25 ºC. Do not apply at risk of rain. Apply in places with good air renewal. In case of insufficient ventilation, use an appropriate protective mask.

Very useful in all types of construction and masonry companies, applicators, painters, maintenance personnel of large communities, repairs of hotels, residences, social centers, shopping and sports centers, etc.
It is used in the protection and waterproofing of facades, exposed bricks, plasters, concrete, natural stone, artificial stone, porous cementitious paints, tiles, etc.

Supported media:
Surfaces made of porous materials, such as brick, plaster, concrete, natural stone, artificial stone, porous cementitious paints, tiles, etc.
Do not apply on facing brick, tiles and monolayer in dark colors. We advise carrying out a test before carrying out the complete work.