• Single-component product with quick and easy application.
• Great elasticity (300%).
• Low viscosity.
• Excellent adhesion on almost all types of surfaces, even on non-porous or closed-pore supports (vitrified surfaces).
• Excellent surface impregnation.
• Can be used as a sealing layer.
• Excellent mechanical properties and tensile strength greater than 30 N/mm2.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars.
Requires smooth and clean support without contaminants or loose particles, removing previously applied cured membranes.
It can be applied to damp or wet substrates (puddles and stagnant water must be removed before application).
It is necessary to start from a porous concrete support, without grout, free of curing liquids, free of dust, level with porosity and dry. Minimum compressive strength of concrete: 15 N/mm2. Minimum tensile strength of concrete: 1 N/mm2.
If in doubt, carry out a test before application.
Product ready to use. In case of dilution, apply only a FUTUR-SOLVENT PU 01 solvent until the required viscosity is achieved with a maximum proportion of 10%.
It is applied with a brush or roller.
Apply in thin layers with a maximum final consumption of 100/250 g/m2 per layer. Once the container is opened, we recommend total consumption.
Carry out repainting before the previous layer dries to increase its adhesion (2-3 hours).

Touch dry: 4-6 hours
Once cured, apply waterproofing membrane once cured and always within 48 hours.
Data at ambient temperature of +25 ºC and 55% relative humidity.
It can be loaded with sand if the support is irregular to increase the thickness of the layers.
Maintenance and cleaning: To maintain the appearance of the floor after application, all spills must be removed immediately after they have occurred. The floor must be cleaned regularly using rotating brushes, high-pressure cleaners, vacuum cleaners, using neutral detergents and appropriate waxes.

Once the container is opened, we recommend its complete consumption.
Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC.

Application in closed areas must be carried out ensuring proper ventilation during application and 24 hours after.
Do not exceed the maximum consumption because it may affect its adhesion and durability.
Avoid the formation of puddles of the product.
In applications exposed to U.V. rays. yellowing may occur.
For applications with chemical resistance, consult the technical department.
Incorrect treatment of cracks and singular points can lead to a reduction in the useful life of the pavement.

To clean materials and utensils, use FUTURSOLVENT 001 before the product hardens. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, repair and restoration of buildings, industrial flooring, etc.
Application as:
• Primer for waterproofing systems and flooring on wet, dry, porous, non-porous substrates (vitrified, aluminum, ceramic tiles, marble, etc.).
• For other supports we recommend carrying out tests to verify their adhesion.