• 100% aliphatic product: Does not yellow, does not change tone or chalk at less than 80
ºC.
• 100% solids product without solvent.
• Great elasticity with high resistance to abrasion, tension and breakage.
• Good adhesion to concrete with high mechanical resistance, resistance to abrasion and chemical agents.
• Excellent resistance to chemicals and hydrolysis.
• Excellent resistance to weather and climatic agents.
• Excellent resistance to extreme temperatures (between –40ºC and + 80ºC).
Maximum shock temperature 200ºC.
• Fast curing (3-4 hours).

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars. It is important to control the dew point to prevent condensation from occurring and avoid whitish areas on the coating.
It is necessary to start from a porous concrete support, without grout and free of curing liquids. Minimum compressive strength of concrete: 15 N/mm2. Minimum tensile strength of concrete: 1 N/mm2.
If in doubt, carry out a test before application.
Product ready to use. We do not recommend dilution.
In most applications it does not require a primer, on vitrified supports apply
FUTURPRIMER T PU.
Mix the two components with the help of a low-speed electric stirrer.
(300-400 rpm) to avoid the inclusion of air in the mixture. Beat component B well in its container, then add component A (resin) and beat for at least 2 minutes until obtaining a homogeneous product. Mixing proportions: 10 Kg of component B for every 5 Kg of component A.
For colored floors, add up to 10% of pigment pastes compatible with component B and mix until a homogeneous product is reached and mix the two components. Do not mix excessively to avoid the inclusion of air bubbles.

Apply with a roller or rubber trowel in thin layers with an approximate consumption of 500 g/m2. The final consumption will depend on the porosity and roughness of the support.
Repainting will be done once the previous layers have dried, approximately 6 hours.
Do not repaint after 8-48 hours. Do not leave more than 48 hours between coats. Apply in very thin layers.
Application time (Pot-life) of 30 minutes at 25 ºC.

Dry to the touch 3-4 hours
Pedestrian traffic 24 hours
Light traffic 2 days
Total curing 7 days
Data at ambient temperature of +25 ºC and 55% relative humidity.

Pigmented finishes according to RAL chart.
Maintenance and cleaning: To maintain the appearance of the floor after application, all spills must be removed immediately after they have occurred. The floor must be cleaned regularly using rotating brushes, high-pressure cleaners, vacuum cleaners, using neutral detergents and appropriate waxes.
Once the container is opened, we recommend its complete consumption.
Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC.
Application in closed areas must be carried out ensuring proper ventilation during application and 48 hours after.
Do not exceed the maximum consumption because it may affect its adhesion and durability.
Avoid the formation of puddles of the product.
In applications exposed to U.V. rays. yellowing may occur.
For applications with chemical resistance, consult the technical department.
Incorrect treatment of cracks and singular points can lead to a reduction in the useful life of the pavement.
To clean materials and utensils, use FUTURSOLVENT 01 before the product hardens. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, building repair and restoration, high-resistance polyurethane industrial flooring, etc.

Application as:
• Finish for the protection and decoration of pavements, increasing resistance to abrasion and UV rays if pigmented, leaving a pigmented finish.
• Valid to increase protection from U.V. rays. and abrasion-resistant sealing for polyurethane and epoxy-based flooring (Futurfloor and Futurfloor Epox).
• Polyurethane and hot Polyurea based waterproofing agents (Futurcoat Poliurea).
• Polyurethane foam protection.
• Concrete protection.
Supported media:
• Concrete, cement mortar, ceramics, synthetic coatings (such as polyurethane and epoxy), construction materials such as natural stone, marble, bricks, wood, metals such as iron, steel and aluminum, etc.