Zero VOC inorganic adhesive.
It does not release toxic gases and is not flammable.
Perfectly seals the joints where it is applied.

• Shake before use. Apply directly to the surface to be cast.
• After approximately one minute. forcefully apply the other plate to be glued on top of the first.
• The adhesive hardens completely in 12 hours.
• Application temperature between 5 and 40 ºC.
• Tools are cleaned with water.

Store in dry places, protected from frost.
Application temperature Between 5 and 40º C
The storage location must maintain a temperature above 5ºC.
When it remains in unopened jars, its expiration period is 9 months.

• Sealing and joining joints between plates when extra tightness is required, such as in duct systems.
• It must be applied to the entire surface to be sealed/adhered.
• Do not use as an alternative to joint paste, nor to cover screw or staple heads.